Skip to main content
Stesso

Balance the Blade

0:56
1:32
9.7K views

At 0:56 in

sharpening lawn mower blades #diy #mowing #lawn #homeowners #tools

Watch on YouTube

What happens here

After sharpening, it is crucial to balance the blade. Pound a nail or insert a screw into a wall. Carefully hang the sharpened lawn mower blade from its center hole onto the nail or screw. Observe if the blade remains perfectly horizontal without any tilt. If one side drops lower than the other, it indicates that more material needs to be removed from the heavier side. Lightly grind or file the heavier side until the blade balances perfectly. A balanced blade prevents excessive vibration during operation, extending the life of mower spindles, bearings, and other components.

Goal: Ensure the sharpened blade is perfectly balanced.

Tools and materials

  • Angle Grinder or File — To remove small amounts of material from the heavier side of the blade until balanced
  • Hammer — To drive the nail into the wall (if using a nail)
  • Lawn Mower Blade — The blade to be balanced
  • Nail — Acting as a pivot point for balancing the blade

What they say

Hide

Probably the slowest way, but also the most precise way. Now, when you're done sharpening, you want to pound a nail in your wall or a screw and go ahead and hang that blade right on the screw there and make sure that it's balanced. Your blade being balanced isn't going to wear out parts like spindles and bearings and everything else. So, make sure that your blade is balanced when you're done sharpening simply by pounding a nail in the wall. And always remember, you don't want a sharp edge, you want a durable

Auto-generated from the video audio.