Re-install Shutters

7:22

8:16

364.9K views

At 7:22 in

Removing Shutters with Shur-Lok Fasteners. Window Shutter Removal.

Watch on YouTube

What happens here

Align the shutter carefully with the pre-existing or newly cleared holes on the house. Insert the new 'Easy-Lok Shutter Buttons' into the holes on the shutter, ensuring the shutter is in the correct orientation (refer to your upward arrows if marked). Use a hammer to gently tap each button until its head is flush with the surface of the shutter. Be careful not to over-hammer, as this can cause an indentation or bend in the plastic shutter material. The barbed design of the fasteners will secure the shutter in place.

Goal: Securely attach the shutters to the house

Tools and materials

Hammer — Tapping in the new shutter fasteners

What they say

(570 characters)

Hide

in reinstalling the shutters on. that we're going through the installation process and putting the shutters on. Just using a hammer, you're just going to tap them in. You want to make sure you tap them in lightly and don't over hammer them in, which will cause a indentation on the shutters cuz they're just plastic. So, you want them just to go flush to the shutter and you don't want it to cause the shutter to bend. If you're putting them in too tightly, the shutter will actually bend. So, just take your time. Just tap them in lightly to right before it gets flush.

Auto-generated from the video audio.