Skip to main content
Stesso

Install Shutters onto House

7:21
8:16
364.9K views

At 7:21 in

Removing Shutters with Shur-Lok Fasteners. Window Shutter Removal.

Watch on YouTube

What happens here

With the fasteners pre-installed in the shutters, align each shutter with its corresponding holes on the house siding. Using a hammer, gently tap each fastener. It's important to tap lightly and avoid over-hammering, which can cause indentations or bending in the plastic shutter. Continue tapping until the fasteners are flush with the shutter, securing it tightly against the house without causing damage.

Goal: Securely attach the shutters to the house siding.

Tools and materials

  • Hammer — Tapping the fasteners into the siding
  • Shutters with Pre-Installed Fasteners — Being installed onto the house

What they say

Hide

in reinstalling the shutters on. that we're going through the installation process and putting the shutters on. Just using a hammer, you're just going to tap them in. You want to make sure you tap them in lightly and don't over hammer them in, which will cause a indentation on the shutters cuz they're just plastic. So, you want them just to go flush to the shutter and you don't want it to cause the shutter to bend. If you're putting them in too tightly, the shutter will actually bend. So, just take your time. Just tap them in lightly to right before it gets flush.

Auto-generated from the video audio.