Skip to main content

Remove Toolless Cellular Blinds

3:55
7:52
150.8K views

At 3:55 in

Removing & Installing Cellular Shades. How to install & remove blinds.

What happens here

Before completely removing the toolless cellular blind, raise it all the way up. This prevents the blind from dangling and potentially tangling or getting damaged during removal. Once fully raised, grab the small tabs on both sides of the blind and pull them out. Then, rotate them counter-clockwise to unlock the blind from the mounting clips. The blind should then easily come off.

Goal: Safely remove the toolless cellular blind from its mounting.

What they say

Hide

those tabs out. But before you remove the line, you want to raise it all the way up. Just like that. Make sure it's it's not tied to anything. Now, just grab those three tabs. Pull them out. And you're going to rotate them counterclockwise. When you reinstall it, you're going to set it right back in that same position. And then just rotate it clockwise to lock it back in place. And you want to push when you reinstall it. push it up against the ceiling so it catches or up against [snorts] the window trim. So you push it up, it'll catch and lock in place. If you don't push it up, it's hanging down a little bit. It's not going to actually catch the blind. So you're just going to take your blind, stick it up, push it up tight, rotate it, it'll lock. So we're going to just rotate all of them out. Next line just comes out simply with no tools. You just take and line

Auto-generated from the video audio.