Skip to main content
Stesso

Introduction and Prepare Screwdriver-Required Blind for Removal/Reinstallation

0:03
7:52
150.8K views

At 0:03 in

Removing & Installing Cellular Shades. How to install & remove blinds.

Watch on YouTube

What happens here

The video begins by introducing the task of removing and reinstalling blinds that require a Phillips head screwdriver. The necessary tools are a Phillips head screwdriver or a drill equipped with a Phillips head bit. Before working on the blind, release both operational lines on the side. The left line, used to raise the blind, should be fully raised and secured out of the way.

Goal: Gather tools and prepare the first type of blind for servicing.

Tools and materials

  • Phillips Head Screwdriver — Loosening and tightening screws on the blind

What they say

Hide

line that actually requires a Phillips head screwdriver. Number three, Phillips head bit. We're going to be using, we've got a drill set up with a Phillips head bin in it. We've got this blind's got two lines on both sides. Want to release lines that they're tied up on the side. Going to release those. The left side used to raise this blind up. We're going to want to get it up and out of the way. And up over here on the back side of this blind, we've got three Phillips head screws that we're just going to loosen up halfway. So, you want to just loosen them up

Auto-generated from the video audio.