Skip to main content
Stesso

Reinstall Screwdriver-Required Blinds

1:08
7:52
150.8K views

At 1:08 in

Removing & Installing Cellular Shades. How to install & remove blinds.

Watch on YouTube

What happens here

To reinstall the screwdriver-required blind, identify the small ridge on the front of the blind's headrail, where the strings emerge. This ridge needs to align with the plastic tabs previously loosened. Angle the blind upward and slide it back into the mounting brackets until the ridge catches the tabs. Once seated, tighten the Phillips head screws with the drill to securely hold the blind in place. Double-check that the plastic tabs are correctly positioned towards you.

Goal: Securely reinstall the blind by engaging its headrail with the mounting tabs and tightening screws.

What they say

Hide

actually holds that blind in there. So the face of the blind, you know, the face of the blind is here's your strings coming out. And the face is this little ridge right inside here. And that's going to catch on to right here. So, we're just going to take that blind, stick it up in there, and you'll angle it and slide it back until you feel it catch. And once it catches, then you're going to take and tighten up your screws. Make sure the that little plastic tab is facing towards you. This one, the little tab spun around. You can see it. And the the sharp part of the tab has got to be facing the blind. Just like that. And now the blinds reinstalled.

Auto-generated from the video audio.