Skip to main content

PVC Solvent Welding

0:05
1:39
150.6K views

At 0:05 in

Plumbing connections

What happens here

To create a PVC connection, first cut the PVC pipe to the desired length using a hand saw and a miter box to ensure a straight cut. Apply PVC primer (a purple liquid) to both the outside end of the PVC pipe and the inside of the PVC coupling. After the primer, apply PVC cement to both surfaces. Quickly push the pipe into the coupling, giving it a quarter turn to spread the cement evenly, and hold it in place for a few seconds to allow the cement to set. PVC is primarily used for drain lines and cold water applications as it cannot handle hot water.

Goal: Securely connect PVC pipes using solvent cement.

Tools and materials

  • Hand Saw — Cutting PVC pipe to length
  • Miter Box — Guiding the hand saw for straight, precise cuts on the PVC pipe
  • PVC Cement — Bonding the PVC pipe and coupling together
  • PVC Coupling — Connecting two pieces of PVC pipe
  • PVC Pipe — The main component for connection
  • PVC Primer — Preparing pipe and fitting surfaces for better cement adhesion

What they say

Hide

There's a bunch of ways to connect plumbing pipes, but knowing which one to use can make all the difference. So, let's get after it. PVC is simple. Cut your pipe, if required, apply primer to both your pipe and your fitting. Apply your cement, push, quarter turn, and hold. PVC is mostly used for drains and cold water applications. It can't handle hot water. That's where PEX comes in. PEX works for both hot and cold water supply lines, and it's extremely flexible, giving you

Auto-generated from the video audio.