Skip to main content

PEX Push-to-Connect Fittings (SharkBite)

0:34
1:39
150.6K views

At 0:34 in

Plumbing connections

What happens here

For situations where a PEX crimp tool is unavailable or when connecting PEX to copper, push-to-connect fittings (often referred to by the brand name SharkBite) offer a tool-free solution. First, clean the end of the copper pipe using a pipe cleaning brush to remove any dirt or burrs. Use a depth gauge (which may also deburr the pipe) to mark the correct insertion depth on both the copper and PEX pipes. Then, simply push the fitting firmly onto the pipe until it reaches the depth mark. This creates a secure, leak-free connection without the need for crimping or soldering. The presenter notes that while convenient, these fittings can be expensive for extensive plumbing jobs.

Goal: Connect PEX or copper pipes using push-to-connect fittings without specialized crimping tools.

Tools and materials

  • Depth Gauge / Deburring Tool SharkBite — Marking insertion depth on pipes and deburring the pipe end
  • Pipe Cleaning Brush — Cleaning the inside and outside of copper pipes
  • Copper Pipe — One side of the connection
  • PEX Pipe — The other side of the connection

What they say

Hide

insert your fitting, and squeeze it with your crimp tool, and then check it with your gauge. But, what if you don't have a crimp tool? Or, what if you need to connect PEX to copper? That's where a SharkBite comes in. Clean your copper, mark your depth, and then just push to connect. No crimping and no soldering. But, these can get really expensive when you're doing a lot of plumbing. That's where soldering comes in. Clean your pipe and your fitting. Apply your flux, press on your fitting, heat your joint,

Auto-generated from the video audio.