Skip to main content

PEX Crimp Connections

0:20
1:39
150.6K views

At 0:20 in

Plumbing connections

What happens here

PEX tubing is a flexible alternative suitable for both hot and cold water supply lines. To make a PEX crimp connection, first slide a metal crimp ring onto the end of the PEX pipe. Then, insert a brass PEX fitting, such as an elbow, fully into the PEX pipe. Position the crimp tool around the crimp ring and squeeze the handles firmly to compress the ring onto the pipe and fitting. After crimping, use a go/no-go gauge to verify the connection. The gauge has specific cutouts for different pipe sizes to ensure the crimp is within tolerance for a secure, leak-free seal.

Goal: Create a secure PEX connection using crimp rings and a crimp tool.

Tools and materials

  • Go/No-Go Gauge — Checking if the crimped connection is within tolerance
  • PEX Crimp Tool Apollo — Compressing the crimp ring onto the PEX pipe and fitting
  • PEX Crimp Ring — Securing the PEX pipe to the fitting
  • PEX Fitting — Connecting PEX pipes at an angle
  • PEX Pipe — Representing a cold water line

What they say

Hide

quarter turn, and hold. PVC is mostly used for drains and cold water applications. It can't handle hot water. That's where PEX comes in. PEX works for both hot and cold water supply lines, and it's extremely flexible, giving you the ability to virtually run it anywhere. Slide on your crimp ring, insert your fitting, and squeeze it with your crimp tool, and then check it with your gauge. But, what if you don't have a crimp tool? Or, what if you need to connect PEX to copper? That's where a SharkBite comes in. Clean

Auto-generated from the video audio.