Remove Masking and Reinstall Hardware

5:53

6:53

432K views

At 5:53 in

Painting A Brick Fireplace. Hacks Painting Bricks or Concrete. DIY How to paint bricks or stone.

Watch on YouTube

What happens here

Once the final coat of stain has dried completely, carefully remove all the masking tape, paper, and plastic coverings from the fireplace insert, walls, and surrounding areas. Take care not to chip or peel any of the new stain. After masking is removed, reinstall the fireplace doors and any other hardware that was taken off or protected. This includes the mantle, which should be reattached to its original position. The fireplace should now appear completely transformed with a clean, updated white finish.

Goal: Complete the project by cleaning up and reassembling the fireplace.

What they say

(793 characters)

Hide

pretty good for this, too. Well, I almost got this thing all sprayed. laid out and back brush. We're going to begin pulling the masking here pretty soon after it's all dry. And then we're going to put back the fireplace. We took those brass uh grates out there, sprayed them semig gloss black. We got to finish spraying the two that are still attached there. And then we'll have this fire fireplace put back together. And we'll show you what that looks like here shortly. So, there you have it. We got all the masking pulled off. Got all this brass painted. We're going to begin putting the doors back on and the rest of this hardware. You can see our fireplace is all completed. Just got a few touch-ups to do, but you can see it's nice white. Looks brand new and up to date and in style now.

Auto-generated from the video audio.