Skip to main content
Stesso

Airless Sprayer Setup

1:50
6:53
432K views

At 1:50 in

Painting A Brick Fireplace. Hacks Painting Bricks or Concrete. DIY How to paint bricks or stone.

Watch on YouTube

What happens here

Set up the airless sprayer with the solid color concrete stain. The presenter uses a sprayer with a short extension and a 208 fine finish tip to minimize dust and overspray. Set the sprayer to a low-pressure setting for better control and reduced atomization of the stain. Ensure the sprayer is properly loaded and ready for application.

Goal: Prepare the airless sprayer for optimal stain application.

Tools and materials

  • 208 Fine Finish Tip — Controlling spray pattern and minimizing overspray
  • Airless Sprayer — Applying the concrete stain quickly and evenly
  • Sprayer Extension — Reaching higher areas and maintaining a comfortable distance from the surface
  • H&C Concrete Stain Solid Color H&C — The primary coating for the brick fireplace

What they say

Hide

we'll begin painting. So, we got our fireplace. It's all masked off now. We've got our air sprayer right down here. It's all loaded up with our stain right now, our solid color stain. And we're just using that to make this process a lot faster just to spray it on. Once again, you could just brush and roll the whole thing, but using some form of sprayer is just going to make it a lot faster. I've just got my sprayer right here with a short extension on it. got a little 208 tip, um, fine finish tip. That way we don't create a lot of dust or overspray. And I've got it set at a really low low pressure, so I'm not creating a lot of dust and overspray either. So, we're just going to begin spraying this. There's two of us here. One's going to spray, one's going to back brush and back roll. Through this

Auto-generated from the video audio.