Skip to main content

Reattach Fuel Line and O-Ring

6:20
9:16
47.8K views

At 6:20 in

New Diesel Fuel is GARBAGE! Stop Fuel Problems Forever...Best Advice You'll Ever get!

What happens here

Using a dental pick or similar small tool, carefully remove the old O-ring from the fuel line fitting. Replace it with a new, fuel-tolerant O-ring to ensure a proper seal. Reattach the fuel line fitting to the new fuel valve (bung) and tighten it securely with a line wrench. Ensure the fuel valve is in the open position to allow fuel flow.

Goal: Remove the old O-ring from the fuel line fitting, replace it with a new fuel-tolerant O-ring, and reattach the fuel line to the newly installed valve.

Tools and materials

  • Dental Pick
  • Fuel-Tolerant O-ring

What they say

Hide

tape even though I had it on hand just in case I've got to pull this piece off right here so that we can retrofit our uh fuel fitting back on there oh there's an o-ring in there talk to your dentist ask them ask them this is what I did my dentist went to all disposable tools and I just asked them if they had any more of these and they said yeah we want to get rid of them too we couldn't bear to throw them away they cost so much that works so I got to pull my old o-ring off probably doesn't need an O-ring but it had one in place we'll pull that old one there we go pop a new o-ring in fuel tolerant O-ring for sure there we go sweetly make sure our valve is in the open position so we make sure we get fuel flow back together get our line wrench in

Auto-generated from the video audio.