Skip to main content

Connecting Multimeter Leads

0:03
1:33
69.5K views

At 0:03 in

Multimeter basics

What happens here

Begin by properly connecting the test leads to your multimeter. The black lead should always be plugged into the 'COM' (common) port, which serves as the negative reference for most measurements. The red lead should be plugged into the port labeled for 'V' (volts), 'Ω' (ohms), 'Hz' (hertz), or temperature, as these are the functions you'll primarily use for basic troubleshooting. The '10A' port is typically reserved for measuring higher current and is not needed for these basic voltage, resistance, or frequency checks.

Goal: Properly connect the multimeter's test leads for standard measurements.

Tools and materials

  • Black Test Lead — Negative connection for measurements
  • Multimeter Klein Tools MM400 — The primary tool for electrical measurements
  • Red Test Lead — Positive connection for measurements

What they say

Hide

Multimeter basics everyone should know. Let's get after it. First things first, hooking up your leads. Your black goes into your common. And your red lead goes right here into your volts, your ohms, your hertz, your temperature, everything else. This 10 amp port is designed for higher current measurements, which we'll get into in a future video. First one, volt. If you go down to select, you can choose between AC or DC. Right now we're

Auto-generated from the video audio.