Skip to main content
Stesso

Building Staircase and Railings

16:02
18:31
57.6K views

At 16:02 in

Most Decks Are Over Complicated. (Do This, It's Easier)

Watch on YouTube

What happens here

Construct the stairs by first securing pressure-treated stringers to the deck frame using appropriate hangers. The stringers can be purchased pre-cut or cut from lumber using a stencil. A concrete landing pad should be poured at the base of the stairs to provide a stable, rot-resistant foundation for the stringers. Once the stringers are in place, install composite decking boards as treads, securing them with exterior screws. Then, attach pre-fabricated railing panels and posts to the stairs. These panels typically feature swivel brackets that allow them to adjust to the angle of the stairs, making installation straightforward. Secure the panels to the posts and the posts to the stringers using self-tapping metal screws.

Goal: Construct and install a staircase with railings

Tools and materials

  • Composite Decking Boards Trex — Stair treads
  • Exterior Screws — Securing treads to stringers
  • Impact Driver Ryobi — Driving screws
  • Level — Ensuring stringers and treads are level
  • Pre-fabricated Railing Panels — Railing sections that adjust to stair angle
  • Pressure-Treated Stringers — The structural side supports for the stair treads
  • Railing Posts — Vertical supports for stair railings
  • Self-Tapping Metal Screws — Securing railing panels and posts
  • Stair Hangers — Attaching stringers to the deck frame
  • Concrete Landing Pad — A stable base for the bottom of the stairs

What they say

Hide

our steps. I am working up a sweat. Today's the first official hot day, so we're hitting 90° in just a little bit of I'm sweating like a pig. But we're moving on. I got all my post secured. I still got to do some final finishing things right now, but we're working on steps. As you can see down below me, we've conveniently poured some uh landing for our bottom of our staircase. And yeah, this is pressuret treated, but that's going to get a lot of wear and tear being on the ground like that. So, we're going to elevate it. You can put pavers if you want if you don't want to pour concrete, but we poured concrete since we had it already. We're going to use these stringers. And if you want to, if you're intimidated about cutting stringers like I am, uh you could just buy one and then stencil it and then save a whole bunch of money cuz one of these is like 30 bucks. But it's going to land just like that. It's going to attach to our deck with these hangers uh down below. Got the appropriate exterior screws. So, a whole gang of them. I mean, there's probably like 11 screws that goes into this. We're going to have six of them here, I think. Uh it's typically with Trex, they want to say like 12 on centerish, 12 to 16. But with all the snow falling on it, we need as much support cuz next winter we don't want it to be sitting like that. That's just awkward. Let's get into it. So, the situation with the steps here, we have to use a blank post here. The reason why you got to attach these little swivel brackets. Then these panels, which are pretty nifty, is they're on a swivel as well. So, they can bend any direction you want. And then once they slide into these little securing brackets there, you throw your screws at the side and you, my friend, just build some staircase railing. Not too shabby.

Auto-generated from the video audio.