Skip to main content

Reset Saw and Clear Sawdust

0:13
1:27
25.5K views

At 0:13 in

Measure once cut 10πŸ‘Š

What happens here

After making the 45-degree cut, return the miter saw blade to its standard 90-degree cutting position (zero it out). Ensure the saw blade is locked in the down position for safety. Crucially, remove any sawdust from the miter saw's table and fence to ensure an accurate setup for the stop block.

Goal: Prepare the miter saw for setting the stop block

Tools and materials

  • Miter Saw Milwaukee FUEL β€” To be reset to 90 degrees and cleaned

What they say

Hide

around. I got you. Now, to make yourself a stop block, grab any size piece of wood that you have. Go ahead and just drop a 45 right in that corner. All right, so now that we have a 45 cut in this corner, we're going to zero out our saw again. So, go ahead, pull your saw down, lock it. You want to make sure there's no sawdust on the table or the fence before you do this. So, now take your stop block, put it on the table and your fence, and adjust it to how big you want your cut. So, in our case, we're going to do a 2-in block.

Auto-generated from the video audio.