Skip to main content

Position and Clamp the Stop Block

0:24
1:27
25.5K views

At 0:24 in

Measure once cut 10👊

What happens here

Position the prepared stop block (with the 45-degree cut facing the saw blade) on the miter saw's table and against the fence. Use a tape measure to set the desired length for your cuts. For example, if you need 2-inch blocks, measure 2 inches from the saw blade to the angled edge of the stop block. Once positioned, use a clamp to securely fasten the stop block to the fence, ensuring it will not move during operation.

Goal: Set the stop block to the desired cut length

Tools and materials

  • Clamp — Securing the stop block to the fence
  • Miter Saw Milwaukee FUEL — The platform for setting the stop block
  • Tape Measure — Measuring the desired cut length
  • Stop Block — To provide a consistent reference point for cutting

What they say

Hide

So, go ahead, pull your saw down, lock it. You want to make sure there's no sawdust on the table or the fence before you do this. So, now take your stop block, put it on the table and your fence, and adjust it to how big you want your cut. So, in our case, we're going to do a 2-in block. So, I'm going to line that up with 2-in block. Hold this down. I'm going to go ahead and clamp this. Now, you're probably wondering, why did we put that 45 on there? Well, I'll show you. If you make multiple cuts, you're going to get sawdust build up right

Auto-generated from the video audio.