Skip to main content

Cut a 45-degree angle on the stop block

0:06
1:27
25.5K views

At 0:06 in

Measure once cut 10πŸ‘Š

What happens here

Begin by selecting any size piece of wood that will serve as your stop block. Place the wood on the miter saw's table and make a 45-degree angle cut on one end of the piece. This initial cut is crucial for the functionality of the stop block.

Goal: Prepare the stop block with an angled edge

Tools and materials

  • Miter Saw Milwaukee FUEL β€” Cutting the wood for the stop block and subsequent workpieces
  • Piece of Wood Unspecified β€” To be used as the stop block itself

What they say

Hide

Do you need 10, 20, 30 boards all cut at the same length and you don't want to measure every single time? Well, stick around. I got you. Now, to make yourself a stop block, grab any size piece of wood that you have. Go ahead and just drop a 45 right in that corner. All right, so now that we have a 45 cut in this corner, we're going to zero out our saw again. So, go ahead, pull your saw down, lock it. You want to make sure there's no sawdust on the table or the fence before you do this. So, now take your stop

Auto-generated from the video audio.