Skip to main content

Make Repetitive Cuts Safely

1:00
1:27
25.5K views

At 1:00 in

Measure once cut 10👊

What happens here

With the stop block securely clamped and the saw set, you can now make your repetitive cuts. Place your workpiece against the fence and the stop block, ensuring it's snug. Power on the saw, bring the blade down to cut through the wood, and then *very importantly*, allow the blade to come to a complete stop before raising it. This prevents the spinning blade from grabbing the cut piece and throwing it, which can be a serious safety hazard. Repeat this process for all the pieces you need to cut.

Goal: Cut multiple pieces of wood to the same length safely and efficiently

Tools and materials

  • Hearing Protection — Protecting ears from loud noise
  • Miter Saw Milwaukee FUEL — Performing the cuts on the workpieces
  • Safety Glasses — Protecting eyes from flying debris
  • Workpiece Wood Unspecified — The material to be cut into consistent lengths

What they say

Hide

that board will always stay tight because the sawdust has a place to go. Now, we just line it up, All right, now it's super important to let that saw come to a full stop before you come up. If I were to just quick chop and come up, that gives this blade an opportunity to grab this block and throw it behind itself. And there you have it. All the same size blocks cut quickly with a stop block.

Auto-generated from the video audio.