Skip to main content
Stesso

Dig Remaining Post Holes

0:48
2:59
5M views

At 0:48 in

Learn how to install a fence and what makes a strong installation 👍 #learn #fence #repair #vinyl

Watch on YouTube

What happens here

Using the marked locations from the previous step, dig out the remaining intermediate post holes with the gas-powered auger. Ensure the holes are dug to the appropriate depth, considering the frost line in your region.

Goal: Dig all necessary intermediate post holes.

Tools and materials

  • Gas-Powered Auger — Digging the intermediate post holes
  • Post Hole Digger — Clearing loose soil

What they say

Hide

to sag. Now you can either measure and mark the holes, lay out the picket fence, and mark the spacer. Flatten it at the end, add half an inch. Place it near the pole, mark the end. Dig another corner, measure the posts, and pour the concrete. For a stronger installation, pre-mix the concrete. You want to make sure your hole is dug below the frost line. This hole fixes the post in the concrete so that it does not lift.

Auto-generated from the video audio.