Skip to main content
Stesso

Fasten the First J-Trim Run

0:14
1:52
21.2K views

At 0:14 in

J-Trim install

Watch on YouTube

What happens here

With the first piece of J-trim cut to length, position it against the wall where it meets the ceiling. Use an 18-gauge crown stapler to fasten the trim securely into the ceiling joists or trusses. Ensure the stapler's depth setting is adjusted correctly to prevent staples from blowing through the material, achieving a flush and secure attachment.

Goal: Securely attach the initial J-trim piece to the ceiling perimeter.

Tools and materials

  • 18-Gauge Crown Stapler RIDGID — Attaching the J-trim to the ceiling/wall
  • Air Compressor — Powering the pneumatic stapler
  • Air Hose — Connecting the stapler to the air compressor
  • J-Trim — The main material being installed
  • 18-Gauge Staples — Fastening the J-trim

What they say

Hide

first run. Make sure when you measure, you measure to the middle of your floor joist, your truss. You don't want to have two pieces joining right here. You want to be able to fasten it. Now, to fasten this J-trim up here, I'm using 18-gauge crown staples. Make sure you set the depth of your nailer, so you don't blow through the steel. Now, we got to do our inside corner and a splice. Here's how to join them. Take your utility knife, slip your blade in there, and just open it up. The end that we're going to

Auto-generated from the video audio.