Unpacking and Initial Layout

uh john john lawson the owner triple seven has the hammer drill and stuff already because he installed all those ones himself we're gonna go through the hardware make sure it comes with the anchor bolts that it says it did once we know that we will most likely unbolt this stuff and move cars around because it's going to go somewhere around here try not to lose anything i'm good at that the concrete has to be 4.25 inches thick four and a quarter this is definitely more than that because it's like warehouse but i think we'll find out for sure so we had to run to home depot real quick at a really big level that's the one thing we needed that we don't have so here we are to get them and i'm going to continue talking to block out the background music so i don't get a copyright strike i'm probably just gonna buy the cheapest one because i don't know that i'm ever gonna need one of these again oh man we just got back and got a package from pro torque this is the converter for uncle rob for the four lady conversion one of the last two things we needed for it um we also need a transfer case well now we got everything pushed out of the way get this thing unbolted from here i really don't know what the best way to do this is but we're just gonna start doing it there's nothing that says how you should or should not do it for this at least that i saw they give you installation instructions not unpalating it instructions so we got to take that piece of wood stick it under the bottom so it supports both of them both of them and then bolt this uh big thanks to derrick for sending this on amazon i know we said something about it several videos ago now's the first time i've opened it up and used it and it's come in quite handy i don't know if that's the right size it's just what i grabbed so we'll see see if it fits too small it's too small neato for this little shipping pal there's like a you know there's some time in that so