Skip to main content
Stesso

Positioning the Posts and Initial Cable Routing

5:12
34:23
41.8K views

At 5:12 in

Installing My BendPak XPR-10AS Two Post Lift From Summit Racing! Is It Worth Doing It Yourself?

Watch on YouTube

What happens here

The presenter and Mike manually lift and position one of the main lift posts. They use a top cross-piece (which will connect the two posts later) as a temporary guide to ensure the correct spacing between the posts. This helps to visualize the final placement before permanent anchoring.

Goal: Roughly position the lift posts.

Tools and materials

  • Lift Posts BendPak — Main vertical structures of the lift
  • Top Cross-Piece BendPak — Used as a spacing guide between posts

What they say

Hide

i think you can get that off uh-huh cool here we're all about the reel and i'm just going to show you the reality of how you move these things across the floor it's kind of weird i don't know if this is actually how you're supposed to do it but it's working i just kind of like make my core tight and you know you wiggle it side to side and just lean on a little bit and it kind of just moves but what i'm doing is i've got you know that one's roughly where it needs to be so i put the top piece out here to figure out roughly where this one needs to be we have to get this thing bolted down so we can work on stuff because i am sick of the lack of progress turn it up

Auto-generated from the video audio.