Skip to main content
Stesso

Prepare Materials and Design Vanity

0:32
19:28
56.7K views

At 0:32 in

I Built An Expensive Home Depot Vanity For $300

Watch on YouTube

What happens here

Begin by acquiring 3/4-inch maple plywood sheets, which were chosen for their durability and appearance. Consult an initial sketch and an online inspiration image of a white vanity with various storage options. The goal is to build a 36-inch wide vanity, incorporating more characterful legs than the simplistic ones seen in the inspiration piece. Confirm all necessary materials are available before proceeding with cuts.

Goal: Start by gathering the necessary materials, primarily 3/4-inch maple plywood, and review the design plans for the vanity. The design aims for a 36-inch wide vanity with multiple drawers and a central sink area, improving upon a simple online inspiration image.

Tools and materials

  • 3/4-inch Maple Plywood
  • Design Sketch/Plans
  • Measuring Tape

What they say

Hide

I'm convinced that all the materials here that are $260 worth of materials minus the paint of course is going to be enough for us to build this $993 vanity so to start off on the right foot we're going to use 3/4 in Maple ply one sheet is like 80 bucks so that's already a lot of our budget I made a sketch of the vanity at least rough Dimensions that I want to go with this is not going to be the absolute layup because of the one that we're going to go with has far more storage options and basically more ideal for what we're looking for now the only thing I don't like about this vanity is I don't like how the legs are way too simplistic so we're going to give it a little bit of ump let me slice these all up to make our 36in wide vanity and then uh we'll see if we can knock this thing out of car let's get into

Auto-generated from the video audio.