Skip to main content
Stesso

Drill Pocket Holes for Assembly

1:39
19:28
56.7K views

At 1:39 in

I Built An Expensive Home Depot Vanity For $300

Watch on YouTube

What happens here

Set up a Kreg pocket hole jig and drill pocket holes on the edges of the plywood pieces that will form the joints. This includes the bottom panel, the side panels, and the internal stretchers and dividers. Ensure pocket holes are strategically placed for strong and concealed connections. This method helps maintain a clean aesthetic once the vanity is finished.

Goal: Prepare the cut plywood pieces by drilling pocket holes, which will be used for strong and hidden joinery during the assembly of the vanity carcass.

Tools and materials

  • Cordless Drill/Driver
  • Kreg Pocket Hole Jig
  • Pocket Hole Screws

What they say

Hide

it we are 3/4 of the way through on our material so we have our bottom our sides these are stretchers pocket hole the stretchers to keep everything intact while not using too much material pocket hole the bottom so they can hold you know the bottom

Auto-generated from the video audio.