Introduction and Tools/Materials Overview

hey folks that fix it guy here today we're going to be installing an insinkerator garbage disposal the model it's a badger 15 ss this is stainless steel components inside it's a three-quarter horse and it's one of my favorite middle-of-the-road picks so come along let's get it hooked up all right the material that we'll be using today to install the garbage disposal which is this is the garbage disposal is going to be the badger 15 ss we're going to need a cord because remember the electrical cord does not come with the badger unless it says it on the box it does not come with the model you can buy models with the cord but most do not come with them and then this is the mounting flange that comes with the disposal this is what we'll be using we'll be using some plumber's putty to install that this has some phillips screws on the bottom of it so we'll be using this six and one screwdriver to put that together and then we'll be using a pair of channel locks i like to use the bigger 440s to actually clip this in place when it's done the step that we use these channel locks is a step that a lot of people don't do and i've gone to people's houses where their disposal have fell off because this was not done all right so let's get to work okay so