Connect Drainage and Dishwasher Lines

12:07

13:51

744.3K views

At 12:07 in

How to replace a garbage disposal STEP by STEP instruction!

Watch on YouTube

What happens here

Now, connect the remaining plumbing. First, re-attach the dishwasher drain line to the disposal's dishwasher inlet, securing it with the worm clamp and tightening it with your 6-in-1 screwdriver. Next, prepare the main discharge tube. If the new disposal is a different size than the old one, you may need to cut the plastic tube to the appropriate length. Take the rubber gasket provided with the new disposal and insert it into the disposal's discharge opening. Now, assemble the main discharge tube by sliding on the flange connector, then the large nut, and finally the washer onto the tube. Position the discharge tube to connect the disposal to the main drainpipe. Once everything is aligned, hand-tighten the nuts and then use your 6-in-1 screwdriver (flathead) to tighten them further, ensuring a snug fit without overtightening. After all plumbing is connected, plug the garbage disposal into the electrical outlet. The installation is now complete, and the unit is ready for testing.

Goal: Complete all plumbing connections for the new disposal

Tools and materials

6-in-1 Screwdriver — Tightening clamps and nuts
Dishwasher Drain Line — Connecting the dishwasher to the disposal
Flange Connector — Connects the discharge tube
Main Discharge Tube — Connecting the disposal to the main drain
Nut — Secures the discharge tube
Rubber Gasket — Sealing the discharge tube to the disposal
Washer — Sealing and securing the discharge tube
Worm Clamp — Securing the dishwasher drain line

What they say

(990 characters)

Hide

disposal install go ahead and we're going gonna just hook up the dishwasher drain line let's grab our six and one just put the worm clamp back on where it was okay so we've got that cut down and with this we just take it put the flange connector on for the garbage disposal put the nut put the washer and now we fit it in place to see if it works so with the with the garbage disposal this little ring right here just fits right in here and you just put that on there before you put the other thing in place so just set that right there and then we'll put it all together okay so nothing's really tight so we put that right there and that's a perfect fit flat head just right there until they're both tight and then you can put put that in place [Music] once you've got the screws tightened and you've got the dishwasher drain line hooked back up to the garbage disposal we can go ahead we can come around over here and we can plug it in and get ready for testing that'll wrap it up for our

Auto-generated from the video audio.