Starting the Engine and Stripping Paint

What happens here

With the nozzle attached, water lines purged, and engine controls set correctly (gas on, choke off if warm, throttle at full, engine switch on), it's time to start the power washer. Hold the trigger on the spray wand to relieve internal pressure, which makes the engine much easier to start. Then, firmly pull the starter rope. Once the engine starts and is running smoothly, direct the spray towards the aluminum-sided house and begin stripping the peeling paint. Move the wand steadily across the surface, observing how effectively the high-pressure water removes the old paint.

Goal: Successfully start and operate the power washer to strip paint