Skip to main content
Stesso

Pressure Adjustment and Hose Connections

2:00
6:03
44.2K views

At 2:00 in

How to operate a Mi-T-M power washer. Pressure washing tips.

Watch on YouTube

What happens here

The video then moves to the power washer's pump system. The presenter indicates the pressure control valve, which allows for adjustment of the PSI (pounds per square inch) output. Although the unit is 3000 PSI, this knob can be turned towards '+' or '-' to increase or decrease the pressure. He notes that typically, it's left at full pressure. Following this, he demonstrates the quick-release connections for the hoses: the top connection is for the high-pressure hose that leads to the spray wand, and the bottom connection is for the water source hose, which simply screws on. The quick release mechanism on the wand allows for easy changing of nozzles.

Goal: Adjust pressure and connect the hoses to the power washer

Tools and materials

  • High-Pressure Hose — Connecting the pump to the spray wand
  • MITM Power Washer MITM — Demonstrating pressure adjustment and connections
  • Power Washer Spray Wand — Directing the high-pressure water
  • Pressure Control Valve — Adjusting the water pressure output
  • Water Source Hose — Supplying water to the power washer

What they say

Hide

full throttle. Then on Honda engines, they all have an onoff switch. You want to make sure it's on in the on position. And then on this MITM power washer, the um pump actually has a pressure control valve. It's a 3000 PSI power washer. But if for some reason you wanted less PSI, there's a plus and a minus. You just want to turn this knob to the plus or the minus direction according to how much uh PSI you wanted. It'll go up to 3,000 and you can turn it down less. We very rarely ever change it. It's typically always set at 3,000 PSI. And then over here on this side is the pump, the quick release. The top is uh hooks up to the hose and then the bottom to the actually the wand that we actually spray the water out of. And then the bottom actually hooks up to the water source. And they just screw right on. This is a quick release. And the bottom one just screws right on. And that's uh

Auto-generated from the video audio.