Engine Control Identification and Setup

and stripping fences. This uh power washer here, we've got um the pull rope. This actually starts the engine. We've got a gas onoff valve right here. And all the way to the right is allowing the engine to have gasoline. When you're done at the end of the day and you want to shut off the gasoline so the engine won't get no gas, you just flip it all the way to the left. We're going to have it all the way to the right. That's on. The gray um switch right here is the choke. All the way to the right is in the run position if it's warm. All the way to the left is choke. If it's really cold outside, you need to choke it to start it. Today's a warm day, so we don't need to choke it. This is the gas. Full throttles all the way to the left. If you just want it to idle, you can move it to the right. We're going to move it all the way to the left. We always keep it the left. At full throttle, we never change that. We actually never change the gas. We always keep it on. We always keep the engine at full throttle. Then on Honda engines,