Loading Masking Tape

1:53

3:00

79.5K views

At 1:53 in

How To Load a 3M Hand Masker. Tape Dispenser Tips.

Watch on YouTube

What happens here

Next, load the 1-inch 3M masking tape onto its designated dispenser. Similar to the paper, the tape should be loaded so it feeds 'over the top' of the roll. Once on the spindle, the tape needs to be threaded underneath a small catch located on the masker. This catch ensures the tape adheres cleanly to the edge of the craft paper and maintains tension, allowing both materials to be dispensed simultaneously and evenly. The presenter demonstrates this process carefully, showing the tape being pulled over the top of its roll and then tucked under the catch.

Tools and materials

3M Hand-Masker
3M 2020 Masking Tape

What they say

(781 characters)

Hide

over one notch. And there we go. Going to take my masking tape, 1 inch masking tape. It's the same idea. Get my masking tape ready. And it's going to be over the top. It's going to go right on my 3M hand masker. It's going to be coming over the top. There's a little catch right here. And there's an arrow on it. And if you can't see that arrow, it actually shows you that it's going underneath the catch. It's going to go underneath that catch. And that's what keeps the tape down and actually so it rolls over the top of the paper. Just like that. And then then I'm gonna stick it to the paper. Gonna tuck it underneath my hinge catch. And just like that, I'm going to rip off a piece. So your paper and plastic or paper and tape. And the blade should all be even just like that.

Auto-generated from the video audio.