Skip to main content
Stesso

Adjusting and Reinstalling the Blade

0:29
3:00
79.5K views

At 0:29 in

How To Load a 3M Hand Masker. Tape Dispenser Tips.

Watch on YouTube

What happens here

The presenter demonstrates that the plastic blade is removable by simply grabbing it and rotating it downwards to pop it off. He explains that the blade has indicators for tape size, guiding where it should be set. If these markings are unclear or obstructed, the blade should be adjusted so it completely covers and extends slightly beyond the masking tape. This ensures a clean and effective tear. To reinstall the blade, it's set down into its designated groove and snapped back into place.

Tools and materials

  • 3M Hand-Masker
  • Plastic Blade

What they say

Hide

removable. And if you just grab it and rotate it downwards, it'll pop off. And the blade should tell you, it should indicate on the blade the tape size and where it should be set for the tape size. If the if the markings are covered with paint or obstructed and you've purchased this thing and you can't read it, just set the blade so the blade's going to be slide over so it completely covers and extends beyond your tape. So it'll rip the tape and paper all at once. To put the blade back on, you're just going to set it down inside the groove and you'll snap it right in place. Just like that. That's how to put on and take off the blade. Now, the

Auto-generated from the video audio.