Skip to main content
Stesso

Combine and Thoroughly Mix Epoxy Components

3:11
12:26
84.3K views

At 3:11 in

How to Epoxy Your Garage Floor Like a Pro | Affordable Rust-Oleum Industrial Floor Coatings

Watch on YouTube

What happens here

After pre-mixing, carefully pour the pre-mixed Part A into a clean, measured mixing bucket (Measurex). Then, add the pre-mixed Part B into the same bucket. Once both components are combined, mechanically mix the entire batch thoroughly for two minutes using the drill and stir whip. This precise mixing duration ensures proper chemical activation and homogeneity of the primer.

Goal: Achieve a fully activated and homogenous epoxy primer mixture.

Tools and materials

  • Drill with Stir Whip 20V MAX — Mechanically mixing the combined epoxy for two minutes
  • Measured Mixing Bucket Measurex — Accurately combining and mixing the epoxy components
  • Seal-Krete Epoxy-Shell 550 Part A — One component of the final epoxy mixture
  • Seal-Krete Epoxy-Shell 550 Part B — The other component of the final epoxy mixture

What they say

Hide

an important thing we did here today was we also kept the material out of the sun allowing it to stay at a workable temperature so we didn't decrease or increase our working time and our cure times 2 minutes is a mixed time what we want to make sure we're properly activated whenever we mix this up we

Auto-generated from the video audio.