Skip to main content
Stesso

Tighten Hose Clamp

0:43
1:00
42.3K views

At 0:43 in

Heavy Duty Fix For A Smashed Up Garden Hose! # #plumbing #hack #helpingothers

Watch on YouTube

What happens here

Slide the hose clamp over the portion of the hose that covers the barb fitting. Using a screwdriver or a socket wrench (depending on the clamp type), begin tightening the hose clamp. Ensure it is snug and creates a tight seal around the hose and the barb fitting to prevent any water leakage. Tighten until the hose feels firmly secured to the fitting.

Goal: Secure the fitting to the hose with the clamp

Tools and materials

  • Screwdriver — Tightening the hose clamp

What they say

Hide

We're gonna take this hose clamp and we're going to slide this over the pipe and we're gonna take the barb side of this fitting And we're just gonna put it right down here inside of this hose I like it about a quarter inch away from the top of that So then we'll just go ahead and start tightening this up. It's good to go. Wala now you're able to add your fittings with ease and This piece right here is a much heavier brass. You're not gonna have any issue with that

Auto-generated from the video audio.