Skip to main content
Stesso

Insert Barb Fitting into Hose

0:35
1:00
42.3K views

At 0:35 in

Heavy Duty Fix For A Smashed Up Garden Hose! # #plumbing #hack #helpingothers

Watch on YouTube

What happens here

Insert the barbed side of the male adapter fitting into the cut end of the garden hose. Push it firmly until the barb is fully seated inside the hose. The narrator recommends leaving about a quarter inch of space from the top of the hose to the threaded part of the fitting, ensuring the hose clamp can properly grip the barbed section.

Goal: Securely place the barb fitting into the hose

What they say

Hide

hose barb fitting male and this is female We're gonna take this hose clamp and we're going to slide this over the pipe and we're gonna take the barb side of this fitting And we're just gonna put it right down here inside of this hose I like it about a quarter inch away from the top of that So then we'll just go ahead and start tightening this up. It's good to go. Wala now you're able to add your fittings

Auto-generated from the video audio.