Skip to main content
Stesso

Secure the Cord in the Clamp

0:36
1:01
143.9K views

At 0:36 in

Garbage Disposal Pigtail Install #plumbing #insinkerator #garbagedisposal

Watch on YouTube

What happens here

Feed the prepared end of the power cord through the Romex connector into the electrical compartment. Position the cord so the outer black sheathing is inside the clamp. Use a screwdriver to tighten the two screws on the Romex connector's clamp, securing the cord tightly so it cannot be pulled out.

Goal: Affix power cord to disposal

Tools and materials

  • Screwdriver — Tightening the clamp screws on the Romex connector

What they say

Hide

Separated. To go more now, you could just pull it, kind of like a twizzler, perfect. The ridge side is connecting to the white to the neutral. And the smooth side is actually connecting to the hot wire. And then agreeing obviously is going to the ground. That in there, through that right down. That way it stays in place. Let's take that ground. We'll just get that in there first. Get it nice and tight. We need some wire nuts. Start below the wire nut, tape up your wire nut. Just to make sure that everything is going to stay together there.

Auto-generated from the video audio.