Skip to main content
Stesso

Connect Ground Wire

0:40
1:01
143.9K views

At 0:40 in

Garbage Disposal Pigtail Install #plumbing #insinkerator #garbagedisposal

Watch on YouTube

What happens here

Connect the ground wire first. Loosen the green grounding screw inside the compartment. Wrap the exposed copper end of the green wire from the power cord clockwise around the screw shaft. Use a screwdriver to tighten the green screw firmly, securing the ground connection.

Goal: Establish ground connection

Tools and materials

  • Screwdriver — Tightening the green grounding screw

What they say

Hide

The ridge side is connecting to the white to the neutral. And the smooth side is actually connecting to the hot wire. And then agreeing obviously is going to the ground. That in there, through that right down. That way it stays in place. Let's take that ground. We'll just get that in there first. Get it nice and tight. We need some wire nuts. Start below the wire nut, tape up your wire nut. Just to make sure that everything is going to stay together there. Take that, pop that in there, pop this back on.

Auto-generated from the video audio.