Install Wall Sheathing

6:13

8:00

585.2K views

At 6:13 in

Frame an 8x12 shed: Intermediate lesson!

Watch on YouTube

What happens here

Install the wall sheathing, which can be 7/16-inch or 1/2-inch OSB or plywood. When working alone with heavy sheets, use a creative technique: nail a small block of wood to the lower part of the wall, then use a 2x4 leverage piece to lift and hold the sheet in place while you secure it. Ensure you nail the sheathing properly, hitting all studs and edges to create a strong, continuous surface. If you choose to install sheathing horizontally, ensure all seams fall on studs. If installing vertically, ensure panels meet on studs and are staggered.

Goal: Cover the wall frames with sheathing for structural rigidity

Tools and materials

2x4 Lumber — Temporary lever for lifting sheathing
7/16 inch or 1/2 inch OSB/Plywood — Wall sheathing
Hammer — Pounding in temporary blocks
Nail Gun Milwaukee FUEL — Nailing sheathing to studs
Small Wood Block — Temporary support for sheathing

What they say

(613 characters)

Hide

If you are working alone and the sheet is too heavy to lift , you can hammer a block. Get a 2x4 of the correct size. This gives you a chance to put it in the right place. When you work alone , sometimes you have to get creative. Now, we will apply this sheet while standing. You can also do this horizontally. In this situation it doesn't really matter. Make sure you nail it correctly. You want to make sure all your edges are well connected. And make sure you do n't miss the studs while doing this. There isn't a lot of cutting to do, but you can use a T- square or chalk line for any cuts you need to make. Be

Auto-generated from the video audio.