Skip to main content
Stesso

Frame Door Opening

5:41
8:00
585.2K views

At 5:41 in

Frame an 8x12 shed: Intermediate lesson!

Watch on YouTube

What happens here

If a door opening was not pre-framed on the ground, you can cut one into the already erected wall. Use a level and make precise marks for your rough opening. Cut the studs to install jack studs (cripple studs) on either side, which support the header. Install a header (typically two 2x6s with a 1/2 inch piece of sheathing in between to match the wall thickness) above the door opening. Secure these components with appropriate fasteners. This creates a robust frame for your door.

Goal: Create a structural opening for a shed door

Tools and materials

  • 1/2 inch Sheathing — Spacer for the header
  • 2x6 Lumber — Creating the header
  • Circular Saw Makita — Cutting studs and header material
  • Hammer — Nailing header components
  • Jack Studs — Supporting the header
  • Level — Making straight marks for cuts

What they say

Hide

Here I have cut and installed the door later. This is something you can frame while on the ground and it's very easy. Just in case, I did it like this. I check the level and then make some marks. I cut my jacks and then install the headers. If you are

Auto-generated from the video audio.