Skip to main content
Stesso

Reinstall Escutcheon Plate and Handle

4:31
7:01
53.9K views

At 4:31 in

Fix Your Leaky Kohler Shower: Complete Cartridge Swap Guide

Watch on YouTube

What happens here

After confirming no leaks, proceed with reassembling the shower trim. First, place the decorative escutcheon plate back over the valve, ensuring its screw holes align with the brass screws. Insert and lightly tighten the brass screws with your screwdriver. Next, attach the handle mechanism, which is a small metal piece that slides onto the cartridge stem and allows the handle to operate. Finally, slide the main shower handle back onto the stem, ensuring it's straight, and tighten it into place by rotating the escutcheon clockwise (righty-tighty).

Goal: Restore the cosmetic and functional parts of the shower faucet.

Tools and materials

  • Screwdriver Milwaukee — Tightening brass screws
  • Escutcheon Plate Kohler — Decorative plate around the handle
  • Handle Mechanism Kohler — Connects handle to cartridge stem
  • Shower Handle Kohler — Controls water flow and temperature

What they say

Hide

now we can just start reassembling that goes in the top hole get that one started in the bottom quick tighten of our brass screws we're going to get this ring right here right around it cleaned up you can see there a little a little funky it's just a little yellow this little piece right here that's going to allow the handle to go back and forth pop this bad boy on there get that tightened up get the plate and the handle on have to keep that straight while we're doing that thought was pretty

Auto-generated from the video audio.