Glue Up Panels and Flatten

What happens here

Apply Titebond II wood glue along the edges of the milled boards and clamp them together tightly using pipe clamps to create wider, solid panels. Ensure consistent pressure along the entire length of the joints. Allow the glue to dry overnight. Once dry, use a Festool Rotex sander (set to rotary mode) to flatten any squeezed-out glue and smooth the panel surfaces, ensuring seamless transitions between boards.

Goal: Individual milled boards are glued together using wood glue and pipe clamps to form wider panels for the console table's top and sides, then flattened by sanding.