Skip to main content
Stesso

Assemble Drawer Boxes

3:54
6:31
26.9K views

At 3:54 in

Entryway Console Table

Watch on YouTube

What happens here

Apply wood glue to the rabbit joints and along the edges where the drawer box pieces will meet. Assemble the sides, front, and back pieces, ensuring the drawer bottom slides snugly into the rabbit joints. Secure the joints using a brad nailer for immediate hold while the glue dries. Repeat for all drawer boxes.

Goal: The drawer box components are assembled using wood glue and brad nails to form the complete drawer boxes.

Tools and materials

  • Air Compressor
  • Brad Nailer
  • Clamps
  • Safety Glasses
  • Brad Nails
  • Wood Glue

What they say

Hide

them everything will be simple and clear for you. As for assembly, I made a rebate about a quarter of an inch from the bottom of the very sides of the drawers, a quarter of an inch wide and three-eighths of an inch deep. This allowed for the insertion of a quarter-inch panel . Assemble everything using carpenter's glue and finishing nails. Okay, drawer front panels. They are probably my favorite part. I made them from poplar, mostly because it's a

Auto-generated from the video audio.