Skip to main content
Stesso

Prepare and Insert Faucet into Sink Hole

1:23
9:30
19K views

At 1:23 in

EASIEST PULL OUT STYLE KITCHEN FAUCET INSTALL EVER!!

Watch on YouTube

What happens here

Take the main faucet assembly and slide the white washer onto the long, threaded copper shaft at its base. Ensure that the grooved side of the washer faces downwards, towards what will be the countertop. The video demonstrates that the standard faucet hole size is typically 1-3/8 inches. Carefully thread all the supply hoses (hot, cold, and spray hose) through the sink hole, followed by the main threaded shaft, until the faucet body sits flush on the countertop.

Goal: Before inserting the faucet into the countertop hole, place the provided white washer onto the faucet's threaded shaft, ensuring its grooved side is oriented correctly. Then, feed the faucet's hoses and shaft through the sink's pre-drilled hole.

Tools and materials

  • White Washer/Gasket

What they say

Hide

actually pretty thin pops right out dude straight out the gate this comes with a plate too and a little bracket that you could hook up for a three hole sink but we only have one hole so really simple right from the top we're just going to take this with this little washer right here you want to put this through there is a groove side right here make sure that groove side goes inside of the faucet right that's how it's gonna get put in place there so this just goes right there and that flush side it's just gonna mount right on your countertop so what we've got here is just that one hole right you're gonna take all this stuff so easy i'm actually doing this one-handed right you're gonna put all this stuff down in here this hole that's drilled should be an inch and three-eighths it's a standard faucet hole size and that's going to go right like that and it's going to mount that way now

Auto-generated from the video audio.