Start Sawmill and Lubricate Components
At 4:20 in
Do you want a Sawmill?
What happens here
Engage the sawmill by inserting the key into the ignition and turning it on. Listen for the fuel pump to engage. Once the fuel pump is audible, turn the key to start the engine, allowing it to warm up to its optimal running temperature. While the engine is warming up, apply Automatic Transmission Fluid (ATF) to the sawmill's moving parts. Use a squirt bottle filled with ATF to lubricate the main rail where the saw head rides, as well as the chains that drive the saw head back and forth and raise/lower it. The goal is to provide adequate lubrication without oversaturating, which would attract sawdust and create a greasy mess. This keeps the mill running smoothly and reduces wear.
Goal: Start the sawmill engine and lubricate key moving parts.
Tools and materials
- Sawmill Key N/A — Starting the sawmill
- Squirt Bottle — Applying lubricant to chains and rails
- Woodmizer LT40 Sawmill Woodmizer — The primary machine being operated and maintained
- Automatic Transmission Fluid — Lubricating the sawmill's rails and chains