Skip to main content
Stesso

Glue Up Panels

0:51
7:19
242.7K views

At 0:51 in

DIY Twin Low Loft Bed

Watch on YouTube

What happens here

Before applying glue, the milled wood pieces are laid out on a clean work surface and arranged to achieve the desired grain pattern and visual aesthetic. Once satisfied with the arrangement, wood glue (Titebond II is mentioned as a good option) is applied in a consistent, even bead along the edges of the boards. The boards are then brought together and clamped using pipe clamps. The goal is to achieve a consistent 'squeeze-out' of glue along the joint, indicating sufficient coverage without over-clamping. The panels are left to dry overnight to ensure maximum bond strength.

Goal: The milled wood pieces are carefully arranged and then glued together using wood glue and pipe clamps to form wider panels for the bed frame components.

Tools and materials

  • Pipe Clamps
  • Work Surface
  • Wood Glue (Titebond II)

What they say

Hide

panel glue up after a few quick passes on the jointer and then creating a parallel side edge on the table saw we were ready for the panel glue up when doing panel Bluest my go-to are these pipe clamps they're really inexpensive and they're super super strong so then I lay down the bottom clamps and on top of the bottom clamps I laid out the exact grain pattern and seam tightness that I'm looking for once I was happy with the pattern I lifted the edges up and I started applying the wood glue what you're looking for is a nice consistent glue up so spread it evenly and put enough on there now when you comes to applying the clamp pressure you are basically looking for just the right amount of wood glue squeeze-out too much of it will deprive the joint of its strength too little of it well you're now gonna have enough glue strength so give a nice firm application and apply only as much as you see squeezing out after everything dries that appropriate amount the next day I'm gonna remove these clamps and put them through a lot of sanding cleaning up all the joints all the wood glue squeeze-out and getting them ready for building now

Auto-generated from the video audio.