Skip to main content
Stesso

Apply Clear Coat Finish

6:25
7:19
242.7K views

At 6:25 in

DIY Twin Low Loft Bed

Watch on YouTube

What happens here

The final step in finishing the bed is applying a clear protective coat. The creator uses a water-based polyurethane (Minwax Polycrylic is a common choice) applied with an HVLP paint sprayer (specifically, a HomeRight Finish Max). This method provides a smooth, even finish. One to two coats are sprayed, ensuring even coverage over all stained surfaces. After each coat dries, the surface is lightly sanded with 220-grit sandpaper to remove any raised wood grain or 'fuzzies' and ensure optimal adhesion for subsequent coats. A final one to two coats are then applied without sanding to complete the protective layer. It's important to wear a respirator mask during this process for safety.

Goal: A water-based polyurethane clear coat is sprayed onto the bed frame, with light sanding between coats, to provide a durable and protective finish.

Tools and materials

  • 220-grit Sandpaper
  • Respirator Mask

What they say

Hide

contrast and get a darker shade that I'm looking for and of course the finishing coat I have the same approach use an HVLP sprayer in my particular using is the new one from home right it's their finish max really liked it a lot and then I use Minwax it's a polyurethane it is a water-based and it applies really easy all I do is spray about one or two coats I let it dry and then I use a 220 sandpaper to kind of cut the grain if you will to get all the fuzzies off and then I do another two coats and then I just leave it alone and let it dry overnight

Auto-generated from the video audio.