Skip to main content
Stesso

Apply Wood Stain

5:21
7:19
242.7K views

At 5:21 in

DIY Twin Low Loft Bed

Watch on YouTube

What happens here

With the bed frame fully assembled, the next step is applying the wood stain. The creator opts for Varathane Premium Wood Stain in 'Antique White', applied with a foam brush. The stain is applied one panel at a time, always going along the grain of the wood to ensure even absorption and a consistent finish. After letting the stain sit for approximately two minutes, any excess is wiped off with a clean, lint-free rag. This method helps control the intensity of the color and prevents blotchiness. Multiple coats can be applied to achieve a darker or more opaque shade, as desired. The wood was previously sanded to 220 grit to prepare it for staining.

Goal: An 'Antique White' wood stain is applied to the entire bed frame using a foam brush, with excess wiped off after a short period, and multiple coats are applied to achieve the desired shade.

Tools and materials

  • Foam Brush
  • Lint-Free Rag
  • Nitrile Gloves

What they say

Hide

basically ready for the finish alright so I'm getting ready to put the stain on this is the first time I'm going with the very same stain this particular color is the antique white no particular reason why I'm going with this was just kind on the Shelf I haven't used it not a sponsored video biome so I'll give it a try my method is always using a foam brush other people like cloth this just keeps my hands clean I don't do tinker with it so I'm gonna put one coat see how it looks and then go from there oh and I stand it all the way up to 220 so that's right in though I don't pride myself in my finishing techniques I do have a consistent approach every single time I take a foam brush and I apply the stain one panel at a time and I go along with the grain then I let it sit for about two minutes I take a clean lint-free rag and I wipe off any excess if I have not reached the particular color that I'm looking for I then do another layer sometimes three at most and then I've just let it dry my general rule of thumb is even if I don't achieve the exact shade that I want once I apply the finishing clear coat on it it tends to contrast and get a darker shade that I'm

Auto-generated from the video audio.