Skip to main content
Stesso

Prepare MDF Strips for Hexagons

0:15
18:45
436.5K views

At 0:15 in

DIY Small Bathroom Makeover | Toilet Area

Watch on YouTube

What happens here

The first step involves preparing the base material for the hexagon accent wall. A 3/4 inch thick, 4x8 foot sheet of Medium-Density Fiberboard (MDF) is used. The sheet is initially cut in half for easier handling. Then, using a table saw, the MDF is ripped into multiple 1-inch wide strips. If a table saw is not available, a circular saw with a clamp and a straight edge (like a 1x5 board) can be used as an alternative.

Goal: Begin by cutting a 3/4 inch thick, 4x8 foot sheet of MDF into 1-inch strips using a circular saw or table saw. These strips will form the individual hexagons for the accent wall.

Tools and materials

  • Circular Saw
  • Clamps
  • Dust Mask/Respirator
  • MDF Sheet (3/4 inch
  • 4x8 foot)
  • Safety Glasses
  • Straight Edge (1x5 board)
  • Table Saw

What they say

Hide

video let's go the hexagon accent wall was the first part of the project I get started with I went with a 3/4 inch thick four by eight sheet of MDF and the great thing is I only needed half a sheet for the amount of hexagons that would require for the wall so basically that's like 15 bucks so far budget wise we're looking pretty good I cut up 1 inch strips on my table side now if you do not own a table saw to accomplish this part there are other alternative options alright you beautiful people so

Auto-generated from the video audio.