Install Hexagon Panels on Wall

What happens here

Begin installing the hexagon panels. Use a laser level to establish a perfectly straight horizontal line, ideally starting from the bottom of the wall above the baseboard. Stack the hexagon pieces (three at a time is recommended) and align them carefully with the laser line. Secure each piece to the drywall using an 18-gauge brad nailer with 1 3/4 inch nails. Be mindful of the six points of each hexagon; slight misalignments can compound errors in subsequent rows. Work level by level, rather than one side at a time, to maintain overall accuracy. Adjust pieces with light taps if necessary. This method helps prevent skewing and ensures a uniform pattern.

Goal: Using a laser level for accurate alignment, attach the hexagon pieces to the wall one row at a time with a brad nailer, ensuring snug fits and proper spacing.