Prepare Bathroom Wall and Remove Toilet

all right so here's the kicker so the MDF is 3/4 inches deep I'm now gonna have any putting it on except for one part this reservoir the container for the water the issue is that for the most part all these toilets are thirty inches deep 30 30 even quarter and this is sitting against the wall and I think it's a design issue where the thing kind of leans against it to distribute the weight so you don't fall back and break the you know the plumbing at the place so I'm basically making an outline of where that reservoir will go the tank and then I'm gonna take the toilet out and install all of our patterns like we cut out and then we're gonna bring the toilet in and make sure we make all the flush cuts in the tight spot so they'll be interesting to say the least yeah yeah it'll be wine a few things to keep in mind yourself yourself up for success is number one turn up the water and give it one last flush number two be mindful that this thing is pretty heavy so have a designated spot that you'll be ready to set the toilet while you work and number three even with the water being drained from the reservoir there is still a few cups of water in the lower section of the toilet below the bowl so that when you shake the toilet as you're moving it it will spill some of it out from the bottoms before