Advanced Tips, Safety, and Edge Work Integration
At 2:32 in
DIY Rolling High Ceilings & Walls. Interior Painting Tips Rolling Walls.
What happens here
While the main painting is done by rolling, precise edge work, often referred to as 'cutting in,' is necessary for a clean finish. The video shows another painter concurrently using a Titan 440i airless sprayer with a 310 tip for cutting in around beams, corners, and other areas where the roller cannot achieve a sharp line. This spray application allows for very clean edges. When combining rolling and spraying, ensure 'Don't try to stretch the paint to far' and maintain a wet edge where the two methods meet. Safety is paramount, and the painter using the sprayer, referred to as John, is shown wearing a mask, indicating the importance of respiratory protection during spraying. The video also notes that existing light fixtures are being replaced, which could simplify painting directly under them.
Goal: Achieve a complete and clean finish by integrating precise edge work and maintaining safety.
Tools and materials
- 310 Tip Titan — Creating a fine spray pattern with the airless sprayer
- Loaded Roller with Extension Pole Purdy — Finishing any remaining high areas by rolling
- Respirator Mask 3M — Protecting against paint fumes and spray particles
- Titan 440i Airless Sprayer Titan — Applying paint for precise cutting-in along edges and features